6CFB25 Factory-restored Cold Feed Bins Built as Two Sets of Three
These cold feed bins have been restored to almost new condition at ADM’s manufacturing facility by its expert factory personnel. The cold feed bins feature new hoppers, idlers and controls.
- 25 ton capacity bins, with 14′ wide x 10′ deep top opening reinforced with heavy-duty angle iron and ¼” thick steel plate bin walls with heavy angle stiffeners for rigid support.
- 30″ wide belt feeders with 5-hp AC motor with variable frequency drive, 4″ diameter flat rollers, lagged head pulleys, self-cleaning adjustable tail pulleys and multi-position radial type discharge gate with positive locks.
- 30″ wide collecting conveyor with 4″ diameter troughing rollers and 4″ diameter flat return rollers, all integrated to the heavy duty “I”-beam construction that includes support legs to grade.
- Open mesh belt guards on all drives for safety and ease of visual inspection.
- Weatherproof, factory wired, power panel and enclosure mounted to the frame, houses the necessary breakers and frequency drives.
Electric Bin Vibrators
The bin vibrator enhances the flow of material when using wet or dense aggregates.
No Flow Detectors on Each Bin
Flow detectors mounted in the discharge opening of each bin alert the operator to an interruption of material flow with a visual and audible alarm.
Tach Feedback on Each Bin
Mounted to the tail pulley of each bin feeder, tachometer transmits belt speed to the blending computer for accurate proportioning control.
Collecting Conveyor Extension
The collecting conveyor extension has a lagged head pulley, reducer, motor, drive and head-shaft with bearings. A spring tensioned belt cleaner is mounted to the head pulley of the collecting conveyor.
EX 8844 225 TPH Asphalt Plant Dryer
- 7′-4″ diameter x 44′ long rotary drum. The 3/8″ thick shell is manufactured from A572 steel.
- Adjustable hardened trunnions driven gear reducers & four (4) 30 hp motors and two (2) oversized guide rollers.
- 3/8″ AR225 pusher flights and production flights, ½” AR400 mixing flights and ¾” AR400 discharge paddles.
Recycle & Additive Entry
- Recycle/Dust inlet chutes and a shroud surrounding the drum shell for the entry of processed recycle and/or dust into the dryer in the non-combustion zone.
- Wear bands with high temperature seals surround the exterior of the shroud to reduce leakage air.
Inlet (Slinger) Feed Conveyor
- Heavy-duty C-Channel construction Inlet (Slinger) Feed Conveyor with 7.5hp x 1800rpm motor.
- Shaft mounted gear reducer with browning sheaves and belts with expanded metal belt guard.
- Cema “B” troughing idlers, Cema “B” Flat idlers for returns and a vulcanized 24″ multi-ply conveyor belting.
- Lagged head pulley and self-cleaning wing pulley with adjustable take-ups.
Hauck Burner Equipment
- 75 million Btu/hr long nose combination burner with wide range of turndown.
- Dual scanner ports, flow meter, stainless steel ignition cone, and adjustable flame shaping capabilities
- 36osi high-pressure atomizing blower with 75 hp x 3600 rpm motor.
- Dual 11 x 22.5 tires and rims mounted on tri-axles, air brakes, stop and turn signals, kingpin hitch and glad hand.
- Air-ride suspension, four hydraulic legs and landing jacks are provided for easy tractor hookup and disconnect.
Asphalt Pumping System
Viking 90 gpm dual mass flow pump system
7.5 HP AC 1200 RPM motor with variable frequency drive
Browning sheaves and belts
Hinge down belt guard over drives
Three-way jacketed valve mounted to metering pump
Pneumatically operated three-way valve with cylinder, air valve and all electrical components
Adjustable motor mount, for belt tension
Temperature compensation with probe, factory mounted
60 pulse per revolution digital tachometer feedback, factory mounted
in a 10” X 8” Nema 4 enclosure
Skid mounted onto a rugged steel base
Primary ”Knockout” Chamber
42,000 -cfm airflow chamber design
Chamber w/heavy duty lifting eyes
structural support legs cross bracing
BHS525 -10 Stationary Baghouse
45,000 cfm air volume
+/ – 30” wg pressure rating
250 -350 F air temperature
15 -20” wg operating vacuum
260 ft/min can velocity nominal
8,243 sq ft filter area
5.1:1 air to cloth ratio
36 scfm @ 80 36 scfm @ 80 -100 psig w/15 sec off time, normal
90 scfm @ 80 90 scfm @ 80 -100 psig w/ 6 sec on time, maximum
Full set(525 bags,6” diameter X 10′ long) of 15 oz 100% Dupont Nomex felt bags. (USED)
High temperature, air purged rotary airlock for fines rerun with 1 hp X 1800 rpm motor