Specialty Tanks

Components >

Fuel Tanks

Available in horizontal and vertical configurations, fuel oil tanks from ADM provide an economical solution for on-site asphalt plant fuel storage. Offered in both relocatable and portable designs, ADM fuel oil tanks are durably built with all-steel construction.

ADM fuel oil tanks range in capacity from 5,000 to 20,000 gallons

Additional options offered include pre-piped pump skids, in-line fuel meters, level indicators, double-walled tanks to help meet stringent regulations containment trays and other customizable features

Available fully insulated with 2″ thick mineral wool, high temperature, semi-rigid R24 board insulation covered with stucco embossed aluminum and heating coils with automatic temperature control

Calibration Tanks

Whether stand-alone or mounted to your new ADM tank, our calibration tanks allow for fast and highly accurate calibration of your asphalt metering system without the need for a large tanker or truck scales.

Available in 1,000- and 2,000-gallon capacities

These tanks are available in either a relocatable or portable design and vertical or horizontal designs

ADM calibration tanks are constructed with high quality US steel and offer many available options such as heating and insulation, automatic valve control and digital indicators

Lifting lugs are provided on top of tank for setting in place

Additive Tanks

1000 gallon UL142 labeled vertical tank is equipped with a 2″ Morrison tee-vent cap, a 50- to 500-degree thermometer, a 2″ drain, a shutoff valve and a 24″ manway with cover, located on tank top.

Lifting lugs are provided on top of tank for setting in place

Tank may be fitted with agitator/mixer to help keep materials in suspension

Available fully insulated with 2″ thick mineral wool, high temperature, semi-rigid R24 board insulation covered with stucco embossed aluminum and heating coils with automatic temperature control

Fuel Pre-Heaters

ADM’s In-Line Pre-Heaters are oil-to-oil heat exchangers designed to help raise the fuel oil’s temperature to operating viscosity at the burner. Electric In-Line Pre-Heaters are also available.

The In-Line Pre-Heater consists of a multi-pass shell and U-tube heat exchanger, and the unit is provided with movable mounting supports and six pipe connections are provided on the unit

A temperature regulating valve is installed in the transfer oil inlet line of the heater and the valve’s capillary tube sensing element is tapped into the supply oil outlet line of the heater

Fuel oil from the supply pump discharge enters the supply oil inlet of the In-Line Pre-Heater and emerges from the supply oil outlet on the opposite end of the shell